Raypak B6000 User Manual

DISPLAYS
System Temperatures * Indicates selectable item
Program the System Control Module to meet the design conditions of the installation.
Return to System Temperature Display by pressing the "MENU" button until screen appears
as below.
Current Outdoor Air Current System Target Temperature
Temperature Water Temperature System Design
Temperature
Selectable °F or °C
Default is °F
INFORMATION ONLY
This is the first screen displayed when system is energized. After system is set up this
display should be used. °F or °C is selectable by pressing "+" or "–".
Provides: - Outdoor temperature – actual
- System Water temperature – actual
- Target Temperature, which is the desired system temperature.
Press MENU button
Boiler Valve
Firing Rates
Indicates Boiler being monitored Provides valve firing position
On multiple boiler installations press "+" or "–"
to view position of other boiler firing rates.
INFORMATION ONLY
- Provides firing valve position for each boiler.
- Multiple boilers - press SELECT button to determine status of each boiler.
Press MENU button
Out door Wat er [ TAR]
XXX ° F XXX [ XXX]
Valve Position
#X: XXX%
Page 23
Displays "H"
if over Hi Limit,
"M" if over MAX
X

Raypak B6000 Specifications

General

Brand	Raypak
Model	B6000
Category	Controller
Language	English