Do you have a question about the Raypak Hi Delta 992B-1262B and is the answer not in the manual?
Model | Hi Delta 992B-1262B |
---|---|
Category | Swimming Pool Heater |
Fuel Type | Natural Gas or Propane |
Input BTU | 1, 250, 000 BTU/hr |
Efficiency | 84% |
Thermal Efficiency | 84% |
Minimum Water Flow Rate | 40 GPM |
Max Working Pressure | 50 psi |
Ignition Type | Electronic |
Heat Exchanger Material | Copper |
Defines safety terms (DANGER, WARNING, CAUTION, NOTE) and lists critical operational precautions.
Guidance on receiving, identifying, and understanding heater specifications and ratings.
Details standards, certifications, and installation guidance for different altitudes.
Details the relationship between water temperature and time to produce scald injury.
Outlines essential installation codes, equipment base requirements, and stacking guidelines.
Specifies minimum required clearances for indoor and outdoor installations for safety and servicing.
Explains requirements for supplying adequate and clean combustion and ventilation air.
Details water piping requirements, including connections and reversing options.
Details gas supply requirements and the impact of water chemistry on heater performance.
Outlines electrical connection requirements, controller guidance, and power source checks.
Explains venting configurations, flue exhaust options, and appliance categories.
Discusses freeze protection measures and safety precautions for heater controls.
Details the operational sequence for different Hi Delta heater models.
Explains optional low water cut-off and various gas pressure and fan/vent safety switches.
Instructions for accessing, reviewing, and clearing fault codes from the diagnostic board.
Special instructions for 87% efficiency boilers regarding water piping, venting, and appliance categories.
Details installation procedures for horizontal and vertical direct vent systems for 87% efficiency boilers.
Covers system filling, air purging, venting inspection, and initial start-up checks before operation.
Details essential preparation steps, including power checks, manometer use, gas pressure, and burner adjustments.
Provides step-by-step instructions for safely lighting the heater.
A visual guide to diagnose and resolve common operational issues with the heater.
Outlines recommended daily, monthly, yearly, and periodic maintenance tasks for optimal performance.
Discusses the effects of contaminated combustion air and potential solutions.
Details the terms, conditions, and exclusions of the heater's limited parts warranty.