Raytools BM110 Series - 5.3.2 Replace Nozzle; Mechanical and Optical Configuration; 6.1 Physical Structure

V1.0 RayToos AG. © Copy Right
www.raytools.ch
BM110 SERIES (Chinese Model) 3.3KW Auto Focus Laser Cutting Head-User Manual
18 | 20
5.3.2 Replace Nozzle
 Screw the nozzle.
 Replace the new nozzle and re-tighten it properly.
 Once the nozzle or ceramic structure has to be replaced, capacitance calibration must be
done again.
6 Mechanical and Optical Configuration
6.1 Physical Structure