Chapter 2
DVR Monitor
RBH Access Technologies Inc. DVR Manual
9
Frame Commands
Right click on a camera display frame and the following menu will pop up. These commands are
done to the selected frame only, and not to all cameras.
Export Frame
Export Frame is used to save a single frame of the video displayed. The frame can be
saved as a bitmap (*.bmp) or as a JPEG (*.jpg) file.
Export Video
Export Video will save the displayed video as either an AVI (*.avi) or as an XPV (*.xpv)
file. After naming the file and determining where the file will be saved to, select the type
of video compression that is to be used.
The video will continue to be exported until stopped manually. When Export Video is
selected Stop Exporting Video is added to the Frame Commands Menu.
Stop Exporting Video
Select Stop Exporting Video to stop the current exporting of video from the selected
frame.
Live
Select Live to unfreeze the selected frame and display the live video from the configured
camera.
Freeze
Select Freeze to pause the live video display and continually display the same frame.
To Next Page
Loading...
Need help?
General