42
XVIII-10. Handlebar tapes and handle grips
Handlebar tapes and handle grips are subject to function related wear and therefore may need
to be replaced.
• Check regularly that the handles are securely seated.
XVIII-11. Hydraulic oils and lubricants
The effectiveness of hydraulic oils and lubricants decreases over time. If lubricants are not
replaced, this increases the wear of the relevant components and bearings.
• Glean and reduplicate all relevant components and bearings regularly.
• Have the brake uid for disc brakes checked regularly, and replaced if necessary.
XVIII-12. Gear-shift and brake cables
Carry out regular maintenance on all Bowden cables.
Have defective parts replaced at a professional bike workshop. This may be necessary espe-
cially If the bike is often left outdoors and is exposed to the effects of the weather.
XVIII-13. Paintnishes
Paint nishes require regular care, this also ensures that your bike looks good.
• Check all painted surfaces regularly for damage and touch up immediately if required.
• Consult your specialist cycle shop for advice on how to care for your bike's surface nishes.
XVIII-14. Bearings
All bearings on the bike, such as the headset, wheel hubs, pedals and bottom brackets, are sub-
ject to function- related wear which depends on the intensity and duration of use and how well
the bike is looked after.
• Check these parts regularly.
• Clean and lubricate them regularly.
XIX. Regular inspections
It is advisable to have your E-bike serviced regularly after bedding-in phase. The schedule given
in the table below is rough guide for cyclist who ride their bicycle between 1.000 and 2,000km
or 50 to 100 hours of use a year. If you consistently ride more or if you ride a great deal on poor
road surface. The maintenance periods will shorten accordingly.
Component What to do
Before every
ride
Monthly Annually Other Intervals
Lighting Check function •
Tyres
Check pressure •
Check tread and side wall •
Brake
Check lever travel, wear of brake
pads, position of pads relative to
rim, test brake in stationary
•
Brake pads Clean •
Suspension fork
Check and retighten bolts, if neces-
sary
•
All-inclusive service(change oil or
grease elastomers
•
To Next Page
Loading...
