RCA 1113 User Manual

Pre-Dialing
1 . With the handset on the c r ad l e , enter the telephone number you wish t o
call. The telephone number shows in the display.
2 . Lift the handset or press the speaker button and the number automatically
dials.
N O TE : Use the delete bu tt on to delete an incorrectly entered
number .
Caller ID Display Messages
The following special messages indicate the status of a message or the unit:
BLOCKED CALL
T h e c a l l e r o f t h e i n c o m i n g c a l l i s
registered as “Private Number” and their
Caller ID information is withheld.
CALL WAITING
Indicates a call is waiting on the line.
Battery power level is low .
NO CALLS
The caller memory is empty.
ST AR T/END
You are at the beginning or the end of
the Caller ID memory log.
UNKNOWN CALLER
The incoming call does not have C a ll e r
ID se r v i c e or t h e i r se r v i c e area is n o t
linked to y o u r s . If the screen displays
UNKNOWN CALLER along with a calling
nu m b e r , the name information for t ha t
number was not available.
T r oubleshooting Tips
No Dial T one
• Check all cabling to make sure that all connections are secure and not
damaged.
• Check hook switch: Does it fully extend when handset is lifted from cradle?
No Display
• Replace the batteries.
• Check for proper battery installation.

RCA 1113 Specifications

General

Brand	RCA
Model	1113
Category	Telephone
Language	English