Operations Reset
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Step through the programming menu using the
UP (▲) key or DOWN (▼) key for OPS RESET,
then press the SELECT key.
3. Once the SELECT key is entered, the remote will display
a message CLR SETUP and remain displayed until the
SELECT key is pressed again.
4. After the SELECT key has been pressed, the remote will
perform a complete Operations Reset. Once the
Operations Reset is complete the remote will exit the
Operations Reset mode and return to its normal
operation.
NOTE:
• Press the CLEAR key at any time to exit the programming
mode. An EXIT SETUP message will appear and the remote
will return to its normal operation.
The Operations Reset clears all custom setup features not related to device code. It is an easy procedure
to reset your remote for customized functions like Learning a key sequence or Macro keys.
Manufacturing Reset
The Manufacturing Reset functions the same as Operations Reset above, with the exception
that the remote resets all the programmed features in your remote.
1. Press and hold the CODE SEARCH key until the remote
window displays CODE SET.
2. Immediately press and release the REC key. The remote
will automatically enter the programming mode where
the Manufacturing Reset will be accessed.
3. Step through the programming menu using the
UP (▲) key or DOWN (▼) key for MFR RESET,
then press the SELECT key.
4. Once the SELECT key is entered, the remote will display
a message CONFIRM and remain displayed until the
SELECT key is pressed.
5. After the SELECT key has been pressed, the remote
will perform a complete Operations Reset. Once the
Operations Reset is complete the remote will exit the
Operations Reset mode and return to its normal
operation.
6. Reprogramming of your device codes are required
because the programmed code are reset to the original
default device codes.
NOTE:
• Press the CLEAR key at any time to exit the programming
mode. An EXIT SETUP message will appear and the remote
will return to its normal operation.
21
To Next Page
Loading...
