Button Description For Audio Operation
The AUDIO keys will only function when the remote is enabled into the AUDIO mode. Simply
push the AUD key to enable all audio functions.
4
CENTER, FRONT, REAR & TEST
Adjust the levels of the center, front and rear
speakers respectively used with LEVEL + /
LEVEL -. The TEST key is used when you make
speaker balance adjustments to maximize the
performance of your audio system including this
unit.
AM•FM
The AM•FM allows you to select the AM or FM
band on your audio system.
LEVEL + & LEVEL –
The LEVEL keys are used when you will make
an adjustment on delay time, center
speaker output level, rear speaker output level,
front speaker level or subwoofer level.
DSP ON-OFF
The DSP key enables the receiver’s Digital
Signal Processing mode.
DSP MODE
When the DSP mode is enabled, pressing this
key allows the user to cycle through the
various DSP modes.
PR
OG
The PROG key is used to program your Audio
preset channels.
CD
,TAPE,TUNER, TV,VIDEO1 & VIDEO2
The CD, TAPE, TUNER,TV, VIDEO1 and
VIDEO2 keys are used to directly select the
device you want to control.
FUNCTION
Selects the different audio input devices. The
number keys also select the function labeled
below the keys when in AUDIO mode.
DELA
Y-, ON & DELAY+
Increases or decreases the delay between the
surround and main speakers when the receiver
is in surround sound mode.
ON-OFF SURR,
MODE
ON-OFF SURR switches the surround modes
on and off. SURR MODE cycles through the
receiver’s various surround sound mode
settings.
To Next Page
Loading...
Need help?
General
