RCA RPJ112

Connecng an USB drive and Micro SD (TF) card
16
Follow below picture to connect an USB drive or a Micro SD (TF) card.
Press the buon to turn off power of your projector before connecon.
Playback from an USB drive or a Micro SD (TF) card
1. Press the buon to turn OFF POWER and the power indicator will light RED.
2. Install the USB device into USB port.
3. Aer connect, press the buon to turn on unit and power indicator will light GREEN
4. Press the buon to USB / TF mode, use / buons to search the file and
press the / buon to start play back.
5. Press / to fast search forward and rewind.
6. Press / to search next or previous file.
7. Hold buon to stop playback.
Note: Please switch off the projector before removing the USB drive or TF card.
OK
OK
Micro
SD card