RCA VR646HF

14
SET DAYLIGHT-SAVING TIME
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
3 Time
4 Channels
S Preferences
6 Audio
7 Language
0 Exit
2. Press 3 to display the TIME menu.
TIME
I Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Get Daylight Savings
XDS Time Data was
found on channel 20.
0 Exit
3. Press 4 to display the SET DAYLIGHT SAVINGS menu.
SET DAYLIGHT SAVINGS
Does your area observe
Daylight Savings Time
from April to October?
I Yes. DST is observed
2 No
3>Automatic
Press MENU to continue
4. Select one of the options and then press MENU to continue.
• DST stands for "Daylight Saving Time."
• if you chose Automatic, the VCR sets the clock using the DST
information broadcast in the signal (channel).
Spring forward, Fall backward
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2 a.m. to 3 a.m.
(forward one hour), including the
extra hour for timer recording within
this time frame is necessary.
In the Fall, Daylight-Saving time ends
on the last Sunday in October. The
VCR clock automatically changes
from 2 a.m. to 1 a.m. (back one hour).
Therefore, it can affect your
recording length.