SETTING THE TIME AND DATE MANUALLY
if the Auto Clock Set was unsuccessful, set the clock through the
TIME menu. The Auto Clock Set feature is set to OFF
automatically when you set the clock this way.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 3 to display the TIME menu.
TIME
I Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
XDS Time Data was
not found.
0 Exit
3. Press 1 to display the SET TiME AND DATE menu.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
4. Enterthe data usingthe number buttons.Press0 before
single-digitnumbers and followthe on-screendirections.
SET TIME AND DATE
Time 12:34 PM
Date 11/18/99 Thursday
Press CLEAR to correct
Press MENU to set
I Time/Date Display 1
Pressing INFO on the remote displays
the time and date on the screen.
15
To Next Page
Loading...
