CARE AND MAINTENANCE – DISPOSAL
TRANSPORT – STORING
During transportation ensure the rigging components are not stressed or damaged by mechanical forces. Use suitable
transport cases. We recommend the use of the RCF HDL6-A touring kart for this purpose.
Due to their surface treatment the rigging components are temporarily protected against moisture. However, ensure the
components are in a dry state while stored or during transportation and use.
SAFETY GUIDE LINES – HDL6-A KART
Do not stack more than four HDL6-A on one Kart.
Exercise extreme caution when moving stacks of four cabinets with the Kart to avoid tipping.
Do not move stacks in the front-to-back direction of the HDL6-A’s (the long side); always move stacks sideways to avoid
tipping.
To Next Page
Loading...
Need help?
General
