RCF IPS 700 - Description; Unpacking and Installation

6
ENGLISH
RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN
MADE TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE.
DESCRIPTION
UNPACKING AND INSTALLATION
IPS series includes four models of two-channel power ampliers designed for professional
use in touring racks and installed sound systems.
The four models only differ in their rated power:
- IPS 700 delivers up to 2 x 300 W into 4 Ω (bridged: 600 W into 8 Ω)
- IPS 1700 delivers up to 2 x 450 W into 4 Ω (bridged: 900 W into 8 Ω)
- IPS 2700 delivers up to 2 x 1100 W into 4 Ω (bridged: 2200 W into 8 Ω)
- IPS 3700 delivers up to 2 x 1500 W into 4 Ω (bridged: 3000 W into 8 Ω).
MAIN FEATURES:
- Fast response and low distortion
- Easy to congure in STEREO / PARALLEL (mono) / BRIDGE modes
- Extensive protective circuits ensure high reliability and operating safety
- Front panel SIGNAL / CLIP / FAULT LED indicators
- XLR input connectors
- SPEAKON output connectors
- Limiter on each channel.
Check the carton box and its contents to see if there is any sign of damage (should the
amplier be damaged, immediately inform your local distributor / dealer and the forwarder).
It is always advisable to keep the packing materials, even if the amplier has arrived in
good condition.
Input and output cables are not included.
Each amplier needs 2 units of a standard 19” rack cabinet.
Four holes for rack mounting are on the front panel ears.
Rear mounting ears give additional support.
The amplier should not be installed in a place with:
- Too high temperature, dust or excessive humidity.
- Fog machine outputs oriented towards the amplier.
- Exhaust air ventilators.
- Permanent vibrations.
- High-intensity electromagnetic elds (due to transformers, transmitters, etc.).