RCF SUB 8006-AS User Manual

9
ENGLISH
WARNING: Never suspend SUB Series subwoofers by there handles. Handles are intended
for transportation, not for rigging
WARNING: Always make sure that the maximum current requirement does not exceed
the maximum admitted POWERCON current. In case of doubt call the closest RCF SERVICE
CENTRE.
SUB 8006-AS, SUB 8004-AS INTERNAL FUSE
220-240V 2XFUSE T 6.3 A H 250 V (1 X SUB 8004-AS)
100-120V 2XFUSE T 10 A H 250 V (1 X SUB 8004-AS)
It is possible to stack HDL 20-A on top of SUB 8006-AS in vertical or horizontal position.
It is possible to stack HDL 20-A on top of SUB 8004-AS in horizontal position.
It is possible to stack HDL 10-A on top of SUB 8004-AS in vertical position.
Always stack the systems using the HDL 20-A (HDL 10-A) fly bar and the locking accessory
(part number 13360231).
INSTALLATION
STACKING
SUB 8006-AS,
SUB 8004-AS
INTERNAL FUSE
WARNING
WARNING

RCF SUB 8006-AS Specifications

General

Subwoofer type	Active subwoofer
Number of subwoofers	2
Subwoofer peak power	5000 W
Subwoofer sensitivity	141 dB
Subwoofer frequency range	30 - 120 Hz
Subwoofer crossover frequencies	80 - 100 Hz
Subwoofer driver diameter (imperial)	18 \
XLR in	Yes
Product color	Black
AC input voltage	230 V
Power source type	AC

Weight and Dimensions

Subwoofer depth	700 mm
Subwoofer width	1109 mm
Subwoofer height	709 mm
Subwoofer weight	90000 g