3
CONTENTS
1.
INTRODUCTION
2.
GENERAL SAFETY
INSTRUCTION AND WARNINGS
3.
POWER REQUIREMENTS AND SET-UP
4.
THE TTL SYSTEM
5.
RIGGING THE SYSTEM
6.
SOUND DESIGN
7.
MAINTENANCE PROCEDURES
8.
TECHNICAL SPECIFICATIONS
TRANSDUCERS TECHNOLOGY
ELECTRONICS
CABINET AND MECHANICS
SAFETY PRECAUTIONS
GENERAL OPERATING PRECAUTIONS
VOLTAGE
CURRENT
GROUNDING
AC CABLES DAISY CHAINS
POWERING FROM THREE PHASE
AUDIO CONNECTIONS AND CABLING
SIGNAL CABLE DAISY CHAINS
INPUT PANEL LEDS
GENERAL RIGGING WARNINGS AND SAFETY PRECAUTIONS
“RCF SHAPE DESIGNER” SOFTWARE AND SAFETY FACTOR
RIGGING SYSTEM
RCF TTL33-A FLY-BAR
RCF TTL31-A FLY-BAR
RIGGING PROCEDURE
TTL33-A GROUND STACKING
RCF TTL33-A KART
HOW LINE ARRAYS WORK
DISTANCE TO THE FAR FIELD OF A LINE ARRAY
SYSTEM CONFIGURATION
ARRAY SYSTEM DESIGN
RCF SHAPE DESIGNER SOFTWARE
CLIMATIC EFFECTS
AMPLIFIER GAIN SETTINGS
USING SUBWOOFERS
PARTS INSPECTION CHECK LIST
To Next Page
Loading...
