50
PARTS INSPECTION CHECK LIST
WARNING
Always check and inspect regularly and before the use all the parts of the system that are used for rigging. Always
replace parts that results damaged or in not perfect conditions. DO NOT USE THE AFFECTED PARTS.
The following parts must be regularly inspected:
• TTL33-A/TTL31-A FLY-BAR
(visual inspection, soldering inspection, screws securely fixed inspection, pin-holes inspection using a pin)
• QUICK LOCK PINS
(visual inspection, working test)
• FRONT BARS AND FRONT METAL CORNERS
(visual inspection, screws securely fixed inspection, pin-holes inspection using a pin)
• REAR BARS AND REAR METAL CORNERS
(visual inspection, screws securely fixed inspection, pin-holes inspection using a pin)
• WOODEN CABINET
(cabinet integrity visual inspection, metal corners securely fixed inspection, general integrity inspection)
7.
MAINTEINANCE
To Next Page
Loading...
Need help?
General
