32
7.3 OPERATING LIMITS / LIMITI DI FUNZIONAMENTO
15 20 25 30 35
10
20
30
40
50
60
70
80
90
95
100
Air intake temperature [°C ]
Umidità relativa
Relative humidity
Water intake temperature [°C ]
Temperatura ingresso aria [°C ]
Temperatura ingresso acqua [°C ]
7
Umidità relativa
Relative humidity
5 3010 15 20 3525 40 45 50
10
20
30
40
50
60
70
80
90
95
100
23
24
Dehumidication only
Sola deumidicazione
Heating only
Solo riscaldamento
Dehumidication only
Sola deumidicazione
I graci sottoriportati descrivono il campo operativo dell’unità.
Nel funzionamento ESTIVO:
• La massima temperatura dell’acqua ammessa per attivare la
funzione di Deumidicazione è di 23 °C.
• Con temperatura dell’acqua tra i 17 °C e i 24 °C e funzione
di Deumificazione in corso, avviene la segnalazione
apposita tramite led a bordo macchina (vedi su descrizione
Segnalazioni)
• Con temperatura dell’acqua al di sopra dei 24 °C il compressore
viene escluso, lasciando in funzione solamente il ventilatore.
La segnalazione avviene sempre tramite led a bordo macchina
(vedi su descrizione Segnalazioni: “Temperatura Acqua non
soddisfatta”)
Nel funzionamento INVERNALE:
Con temperatura dell’acqua tra i 24 °C e i 50 °C, è possibile
attivare la sola ventilazione per la funzione di solo riscaldamento.
Con temperature dell’acqua superiori a 50 °C
l’apparecchio potrebbe danneggiarsi.
E’ importante fare in modo che le unità operino nei
limiti riportati. Al di fuori di tali limiti non sono garantiti
né il normale funzionamento né tanto meno l’adabilità
e l’integrità delle unità (per applicazioni particolari
contattare l’ucio tecnico del Costruttore).
The graphs shown below describe the operating range of the unit.
In SUMMER operation:
• The maximum water temperature allowed to activate the
Dehumidication function is 23 °C.
• With water temperature between 17 °C and 24 °C and the
Dehumication function in progress, the appropriate signaling
is carried out by LEDs on the machine (see Signals Description)
• With water temperature above 24 ° C the compressor is excluded,
leaving only the fan running. The signaling always takes place by
means of LEDs on the machine (see Signals Description: “Water
temperature not satised”)
In WINTER mode:
With water temperature between 24 ° C and 50 ° C, only ventilation
can be activated for the heating only function.
With water temperatures higher than 50 °C, the
appliance could be damaged.
It is important to ensure that the units operate within
the limits shown. Beyond these limits, normal operation is
not guaranteed, nor is the reliability and integrity of the
units (for special applications, contact the manufacturers
technical oce).