REMOTE CONTROL OPERATING GUIDE (continued)
Manual mode
Manual mode does not require that the time and day of the week are set.
Press the s or t button to increase or decrease the temperature desired.
Automatic mode
The automatic mode allows the temperature to be regulated according to a programmed level and
time.
Manually overriding the set program
At any time, the temperature may be adjusted up or down. However, whenever the thermostat
changes to a new time period, the temperature will be set automatically according to that period’s
setting.
Programming
Each day of the week can be programmed individually for 4 periods P1, P2, P3 and P4, making a
total of 28 programmed periods.
Alternatively, a weekday program can be set, so the same program is used for Monday-Friday.
Similarly, a weekend program can be set for Saturday-Sunday. The entire week can also have the
same program.
Alternatively, a weekday or weekend program can be set with individual programs for the
remaining days.
The suggested period settings for each day/s are:
• Period 1 - morning
• Period 2 - daytime
• Period 3 - evening
• Period 4 - night-time
To begin programming
With the thermostat off, press and hold the ‘P’ button for 2 seconds or longer to initiate
programming. The LCD will display , and the time at which the thermostat is currently
set. will flash.
Period 1 can now be set.
• Setting the day of the week
You must choose which day/s of the week you wish to program.
Press and release the s or t button to change the day of the week to the following or
previous day. Press and hold the s or t button for 2 seconds or longer to increase or
decrease the day of the week by 1 day every 0.5 seconds.
The order that you can scroll through the days is as follows:
MO → TU → WE → TH → FR → MO TU WE TH FR → SA → SU → SU SA → MO TU WE TH
FR SA SU
To accept the selected day/s of the week press ‘OK’.
46
To Next Page
Loading...
