SERVICING AND MAINTENANCE (continued)
8. Remove burner
9. Remove bottom of burner tray, fan is
then exposed and may be serviced or
removed
After carrying out service or
replacing parts, reverse the
above processes to reinstate
the unit.
Prior to lighting ensure there
are no gas leaks.
• Check the appliance for gas leaks
• Check that all electrical connections are secure
• Check that the power to the unit has been turned on
It is recommended that you have your landscape installation inspected yearly
including a visual check of the flue system and flame pattern.
To service or change gas valve
or control modules, the
process is the same as steps
1 to 3.
FOR YOUR SAFETY READ BEFORE LIGHTING
MAINTENANCE
21
To Next Page
Loading...
