13
OPTICAL IN OPERATION
1. Connect the OPTICAL OUT jack from the external audio player (such as TV,
DVD player etc.) to the OPT jack on the rear of the unit.
Connection is illustated below:(For PCM format only)
2. Press the POWER button on the unit or the remote control to switch on
the unit.
3. Press the OPT/COAX button on the remote control or press the M button on
the unit repeatedly until the LED 4 lighting blue to switch to optical mode.
Press the OPT/COAX button on the remote control ONCE to switch to
OPT function. Press this button TWICE to switch to COAX function.
Press this button repeatedly to switch to OPT or COAX.
NOTE:
4. Using the native controls on your connected device, make sure the audio
settings are set to PCM or Optical Audio and are turned On. Audio from the
connected audio source will now be played through the speakers.
OPT
COAX
ARC
USB
AUX
POWER
SUB
DC IN
L
R
TV
OPTICAL OUT
REAR PANEL
To Next Page
Loading...