• Emergency lowering at least twice a year
(Carry out maintenance focusing on malfunc-
tions!)
• Rolling smoothness, functioning of the castors
(replace any defective castors)
• Functioning of the drive unit, manual switch
(replace any defective items)
• All cables, connections and plugs for damage
• Sealing edges of control and rechargeable battery
unit
• EMERGENCY OFF function
• Inspect accessories for deficiencies
20.2. Maintenance of the sling hanger
• The bolt and the brass washer must be checked
for abrasion during the annual maintenance. By
pushing up the sling hanger, the bolt (A) with the
brass washer is pushed through the opening of the
rubber cap.
• In case of heavy abrasion of the brass washer (B)
or bolt, then they must be replaced.
20.3. Repair
• If you have any questions concerning the mainte-
nance and repair of the device, please contact an
authorised dealer or a medical and healthcare sup-
plies store.
• When performing repair work, please use only
original REBOTEC spare parts. Observe all guar-
antee and warranty information.
• Never make any unauthorised modifications or
conversions to the device. These will only ad-
versely affect the safety and functioning of the de-
vice. In such cases, REBOTEC will not assume
any product liability.
• Follow all the instructions for ordering spare parts,
reuse and the lifetime of the device.
• After maintenance or repair work has been carried
out, we recommend you to clean the device for hy-
gienic reasons before using it again. Follow the
cleaning and care instructions.
For documenting the maintenance and repair
work, REBOTEC provides a Maintenance Re-
port.
You can order the User Manual, Maintenance Report
and Reprocessing Instructions or find them on our
website at www.rebotec.de.
It is also possible to print the information and read it
when needed.
To Next Page
Loading...
