EasyManua.ls Logo

Rebotec Arnold 150 - Product Description; Product Introduction; Product Features; Intended Purpose

Rebotec Arnold 150
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REBOTEC / BA-Nr.: 02.09.200/2021-08-A01
- 3 -
EN
1. Product description
Figure shows:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1.1. Introduction
• The product described here is a medical device of
risk class I according to (EU) 2017/745 MDR.
• In this user manual, you will find information on the
safe and proper initial operation, use, maintenance
and care of this product.
• Carefully read this user manual before using the
device. Follow the safety instructions and act ac-
cordingly.
2. Features
2.1. Intended purpose
• The product is used for changing the position of
patients with mobility impairments. It allows access
to toilets, beds, bathtubs, bathing aids and wheel-
chairs. A knowledgeable caregiver must be pre-
sent during application. The product must be ex-
clusively operated by this caregiver. The product is
not intended for prolonged moving and transfer.
Specification:
• Maximum user weight for Arnold 125: 125kg
• Maximum user weight for Arnold 150: 150kg
• Electric lifting mechanism
• 2 swivel castors, lockable
• Indoor use
Indication
• Significant to full impairment of changing body po-
sition and walking, usually with neuromuscular
damage, amputation of lower limb(s), or neurolog-
ical disease
• When other hoists or transfer aids can no longer
be used
• To facilitate change of position and short-distance
transport within the home by an assistant/care-
giver
2.2. Conditions of use
• Temperature range: 5°C to +35°C; direct radiant
heat on the product must be avoided.
• Relative humidity: 40%-75%. Outside of these
conditions, the product must only be used for a
short time.
• The product is not suitable for use in swimming
pools or saunas, as surface discolouration and lim-
itations of mechanical strength may occur.
• The product is foldable for transport or storage.
• There must be a flat surface of sufficient size for
the hoist to be placed on.
2.3. Storage & transport
• Temperature range: 5 °C to 25 °C; direct radiant
heat on the product must be avoided.
• Store the product in dry rooms with a humidity of
up to 65%.
2.4. Equipment & functions
• Electrical and mechanical emergency lowering
• Foldable
• Pinch protection
• EMERGENCY OFF function
• Network-independent application
• Spreadable chassis for higher stability
A
B
C
D
F
E
G
H
I
J
K
L
M
N

Other manuals for Rebotec Arnold 150

Related product manuals