Record Power SABRE-250 - Getting to Know Your Bandsaw

To Next Page

To Previous Page

6. Specifications

5. Getting to Know Your Bandsaw

Maximum depth of cut:

127 mm

Throat depth: 245 mm

Table size: 350 x 318 mm

Table height from base: 368 mm

Motor input P1: 550 W

Motor output P2: 370 W

1 On / off switch

2 Rip fence

3 Blade tensioning knob

4 Upper door knob

5 Upper blade guides

6 Blade

7 Table

8 Lower door knob

9 Rip fence locking handle

10 Lower blade guides

11 Protective cover

12 Blade tracking knob

13 Blade tracking lock

14 Cam tension lever

15 Motor

16 Tool holder

17 Blade guide position knob

18 Blade guide position lock

19 Drive belt tension release nut

20 Dust extraction port

21 Trunnion

}

Associated uncertainty K=4 dB measurement

made in accordance with EN ISO 3746:2010

The ﬁgures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission and exposure levels,

this cannot be used reliably to determine whether or not further precautions are required. Factors that inﬂuence the actual level of exposure of the workforce

include the characteristics of the work room and the other sources of noise, etc., i.e. the number of machines and other adjacent processes.

Also, the permissible exposure level can vary from country to country. This information, however, will enable the user of the machine to make a better

evaluation of the hazard and risk.

Sound power level: <100dBA

Sound pressure level: <90dBA

Main document number: BS250B

Voltage: 230 v

Frequency: 50Hz

Full load current: 2.4A

Short circuit rating: 1 kA

Motor speed: 1400 rpm

Blade length: 70.5”

Blade width capacity: 1/4” (6 mm) - 1/2” (12 mm)

Blade speed: 460 m / minute and 1000 m / minute