To Next PageTo Next Page
Need help?Do you have a question about the Record Power TS250C and is the answer not in the manual?
General| Blade Diameter | 250 mm |
|---|---|
| Blade Bore | 30 mm |
| Max. Depth of Cut at 90° | 80 mm |
| Max. Depth of Cut at 45° | 55 mm |
| Dust Extraction Outlet | 100 mm |
| Weight | 38 kg |
| Motor Power (Output) | 1100W |
| Blade Tilt | 0°-45° |
Symbols requiring user action before operating the machine.
Symbols indicating potential risks and dangers during operation.
Covers PPE, dressing, machine stability, and work area.
Details on clearing the work area, removing tools, and pre-operation checks.
Addresses electrical connections, cable safety, and outdoor use restrictions.
Covers safe workpiece handling, dust extraction, and guarding.
Emphasizes disconnecting power, checking parts, and tool maintenance.
Advises on qualified repairs and motor heat caution.
Covers machine familiarization, blade condition, and guard checks.
Details during machining, maintenance, and relevant safety regulations.
Explains the 5-year guarantee, what it covers, and limitations.
Outlines the process for making a claim and liability limits.
Lists package contents and advises on rust preservative removal.
Visual guide to the different parts of the table saw.
Provides detailed specifications like blade size, power, and dimensions.
Details noise emissions and required dust extraction performance.
Lists the parts needed for assembling the main saw unit.
Instructions for fitting the handwheel and connecting the dust extraction hose.
Steps to ensure the extraction hose connector is properly attached.
Step-by-step guide for assembling the machine's cabinet stand.
Instructions for installing and adjusting the sliding table for accuracy.
Procedures for checking and adjusting the height of the sliding table.
Guidance on troubleshooting and ensuring smooth sliding table movement.
Instructions for attaching the optional right-hand table extension.
Guidance on installing the rear table extension.
Steps for correctly fitting the crown guard for safety.
Lists and identifies all parts of the rip fence assembly.
Instructions for mounting the fence bar and attaching the scale.
Guides on assembling and attaching the fence carrier to the rail.
Procedures for ensuring the fence is square to the blade.
Instructions for connecting the dust extraction hose to the crown guard.
Fundamental concepts of using a circular saw safely and effectively.
Demonstrations of ripping, cross-cutting, and panel sizing techniques.
Guidance on choosing the correct blade type for different materials and cuts.
Best practices for maintaining saw blades for longevity and performance.
Techniques for supporting workpieces and the safe use of push sticks.
Instructions for setting the saw guard, rise & fall, and blade tilt.
Explains kickback causes and methods to prevent it.
Covers sliding table use and procedures for machine stalls or power failures.
Explains why dust extraction is crucial for safety and machine upkeep.
Overview of Record Power's dust extraction equipment and recommendations.
Detailed steps for safely changing the saw blade.
Instructions for adjusting the belt tension on the motor.
Details electrical connection standards, color codes, and safety advice.
Lists and illustrates parts for the main saw unit.
Lists and illustrates parts for the cabinet and support structures.
Lists and illustrates parts for the sliding table and fence mechanisms.
Lists and illustrates parts for extension tables and fence components.
Detailed list of machine parts with reference numbers and descriptions.
Continuation of the detailed parts list with reference numbers and descriptions.
Visual representation of parts for the cabinet stand assembly.
Declares the machine's compliance with EU directives and safety requirements.
