Need help?Do you have a question about the Record Power BS250 and is the answer not in the manual?
General| Type | Bandsaw |
|---|---|
| Max Cutting Depth | 100 mm |
| Max Cutting Width | 245 mm |
| Motor Power | 250W |
| Blade Length | 1790 mm |
| Throat Depth | 245 mm |
| Table Tilt | 0-45 degrees |
| Table Size | 305mm x 305mm |
| Riving Knife | No |
Comprehensive safety rules for operating the bandsaw, covering work area, personal protection, and machine handling.
Instructions and advice on maintaining the machine and contacting support for service.
Detailed safe practices for operating bandsaws, including blade care and workpiece handling.
Covers warning labels, mechanical safety checks, and wood dust precautions for bandsaw use.
Details on supply network, customer rights, and returning guarantee cards for new products.
Specifies the 5-year guarantee period, conditions for repair/replacement, and exclusions.
Outlines the process for making a guarantee claim, from contacting the retailer to submitting a written claim.
Clarifies the scope of the guarantee, exclusion of consequential loss, and statutory rights.
Lists parts for stand and wheel kit assembly, including legs, frames, and wheels.
Details steps for assembling the stand, attaching the wheel kit, and securing the bandsaw.
Lists the components included for initial assembly after unpacking the machine.
Attaches table, fence rail, and rip fence assembly to the machine body.
Adjusts fence alignment and installs tension knob, extraction port, and sub fence.
Adjusts and calibrates table tilt, stop, and scale for accurate 90° setup.
Procedures for setting correct blade tension and tracking on the bandwheels.
Sets upper/lower blade guides and adjusts cutting height for optimal blade support.
Details mains connection, wire colors, RCD use, and switch operation for safe power-up.
Covers basic techniques, advanced cuts, blade stalls, and safe operation.
Guide to choosing blades by TPI/width, checking quality, and using custom jigs.
Explains the necessity of dust extraction for health, safety, and machine upkeep.
Introduces Record Power dust extractors and provides a compatibility table for bandsaws.
Step-by-step guide for safely removing and fitting a new bandsaw blade, including guide adjustments.
Covers replacing drive belts, guide rollers, and bearings for continued operation.
Procedures for replacing consumable parts and maintaining table and brushes.
Details electrical connections, safety, and lists consumable spare parts.
Illustrated diagram showing the components of the optional stand and wheel kit with reference numbers.
Detailed exploded view diagram of the bandsaw components with reference numbers.
To Next Page
