To Next PageTo Next Page
Need help?Do you have a question about the Record Power SS16V and is the answer not in the manual?
Guidance on using protective eyewear, respiratory equipment, hearing protection, footwear, and gloves.
Action to remove all tools before switching the machine ON to prevent injury.
Checklists before operation: clear table, check workpiece, secure devices, plan operation.
Maintaining clear working spaces, tidy benches, and clean floors to prevent accidents.
Requirements for dedicated circuits, earthed supply, circuit breakers, and correct plugs.
Emphasizing operator alertness, avoiding tiredness, drugs, alcohol, or medication.
Mandatory use of dust extraction equipment, switched on before and after operation.
Warning not to use the machine without standard safety guards in place.
Instruction that repairs must be done by qualified persons using original parts.
Note that motors can become hot and advise against direct touching during use.
Details the 5-year guarantee for components free from defects in construction or manufacture.
Steps for making a guarantee claim, starting with the Authorised Dealer.
Guidance on placing the scrollsaw on a flat, level surface, ideally a workbench.
Detailed steps for installing pin-end blades into the upper and lower blade holders.
Instructions for installing plain-end blades using blade adaptors and setting jig.
Steps for positioning workpiece, using guards, and starting the cut.
Guide on setting the table to 90° and re-calibrating the degree scale pointer.
Instructions for positioning the table between 0 and 45° for bevel cuts.
Method for cutting large workpieces by positioning blade at 90°.
Instructions for fitting pin-end blades when the blade holders are at 90°.
Steps for fitting plain-end blades and their adaptors at the 90° position.
Procedure for safely freeing a trapped blade and checking for damage.
Connecting dust extraction equipment to the 35mm outlet for effective dust removal.
Wiring colour codes and terminal connections for 230V single-phase supply.
Wiring colour codes and terminal connections for 400V three-phase supply.
HSS skip tooth plain end blades for fast cutting and good chip clearance.
HSS plain blades with reverse tooth skip pattern for splinter-free finish.
Pin end blades ideal for machines with universal jaws, good for straight cuts.
Pin end blades ideal for faster cutting with better chip clearance.
General| Brand | Record Power |
|---|---|
| Model | SS16V |
| Category | Saw |
| Language | English |
