To Next PageTo Next Page
Need help?Do you have a question about the Record Power WG200 and is the answer not in the manual?
General| Brand | Record Power |
|---|---|
| Model | WG200 |
| Category | Drill |
| Language | English |
Guidance on essential protective gear like eyewear, respiratory protection, and gloves for safe operation.
Ensures safe use by covering machine stability, proper footing, and keeping work areas clear of hazards.
Details on proper electrical connections, avoiding shock, and safe handling of power and extension cables.
Instructions for securely holding workpieces and safe feeding techniques to prevent accidents.
Emphasizes checking for damage, using qualified repair services, and precautions for motor heat.
Covers safe placement on workbenches, stability, and avoiding finger trapping hazards.
Guidance on handling brittle grinding wheels, frost protection, and stone dressing procedures.
Details on correct jig selection, water levels, and safe honing techniques for tool edges.
Outlines the 5-year guarantee, its coverage for defects, and product usage conditions.
Explains how to initiate a claim, reporting damage, and limitations of liability.
Instructions for fitting the support arm using upper or side brackets and installing the water trough.
Step-by-step guide for assembling the profiled leather honing wheel with shaft extension.
Procedures for ensuring the stone is parallel, concentric, and has the correct surface for sharpening.
Guides on using specific jigs like the straight edge jig for sharpening blades and tools.
Techniques for honing sharpened tools using the leather honing wheel for optimal sharpness.
Procedures for safely handling machine stalls and responding to power interruptions.
Jig for sharpening bowl gouges, spindle gouges, and V-tools on the wet stone sharpener.
Jig for sharpening plane irons and bevel edge chisels effectively.
Jig for sharpening plane blades, including creating precise cambered edges.
Jig designed for sharpening scissors and garden shears accurately.
Jig for sharpening small knives, pocket knives, and cutlery up to 100mm.
Jig for sharpening larger knives, cutlery, and draw knives over 100mm.
Jig for sharpening carving axes and carpenter's axes.
Used for honing the inside profiles of tools like woodturning roughing gouges.
Guidance on changing water, cleaning housing, and inspecting motor brushes for wear.
Instructions for safely replacing the sharpening stone and the honing wheel.
Addresses problems like motor not starting, excessive vibration, and possible causes.
Solutions for flat or poor sharpening surfaces and brush sparking issues.
