Record Power WG200 - 10.10 WG250;J Axe Jig

29
10.10. WG250/J Axe Jig
Use to sharpen:
• Carving axes
• Carpenter’s axes
The axe jig slides onto the support arm of the wet stone sharpener.
Fig 10.10.1
Using the Axe Jig
Mount the support arm in the upper position and slide the axe jig onto it as
shown in Fig 10.10.1.
Hold the axe head in the jig and tilt the axe blade slowly back and forth
across the sharpening stone.
Turn the axe head over and repeat the process.