15
PAXR: MAINTAINED (LEVEL) RESET AND INHIBIT
PAXR: MOMENTARY (EDGE) RESET
15
MAINTAINED (LEVEL) RESET AND INHIBIT
The meter performs a reset and inhibits the displays configured as , as
long as activated (maintained action).
INHIBIT
The meter inhibits the displays configured as , as long as activated
(maintained action).
Minimum
Maximum
Counter C
Counter B
Counter A
FACTORYDESCRIPTIONDISPLAY
MOMENTARY (EDGE) RESET
When activated (momentary action), the meter resets the displays configured as
. (Momentary resets improve max. input frequencies over maintained resets.)
Minimum
Maximum
Counter C
Counter B
Counter A
FACTORYDESCRIPTIONDISPLAY
Minimum
Maximum
Counter C
Counter B
Counter A
FACTORYDESCRIPTIONDISPLAY
STORE DISPLAY
The meter holds (freeze) the displays configured as , as long as activated
(maintained action). Internally the counters and max. and min. values continue to
update.
DEACTIVATE SETPOINT MAINTAINED (LEVEL)
The meter deactivates the setpoints configured as , as long as activated
(maintained action). This action only functions with a Setpoint card installed.
DEACTIVATE SETPOINT MOMENTARY (EDGE)
When activated (momentary action), the meter deactivates the setpoints
configured as . This action only functions with a Setpoint card installed.
HOLD SETPOINT STATE
The meter holds the state of the setpoints configured as , as long as
activated (maintained action). This action only functions with a Setpoint plug-in
card installed.
Minimum
Maximum
Counter C
Counter B
Counter A
FACTORYDESCRIPTIONDISPLAY
ACTIVATE SETPOINT MOMENTARY (EDGE)
When activated (momentary action), the meter activates the setpoints
configured as . This action only functions with a Setpoint card installed.
Setpoint 4
Setpoint 3
Setpoint 2
Setpoint 1
FACTORYDESCRIPTIONDISPLAY
When activated (momentary action), the display intensity changes to the next
intensity level (of 4). The four levels correspond to Display Intensity Level
() settings of 0, 3, 8 & 15.
CHANGE DISPLAY INTENSITY LEVEL
ACTIVATE SETPOINT MAINTAINED (LEVEL)
The meter activates the setpoints configured as , as long as activated
(maintained action). This action only functions with a Setpoint card installed.
DISPLAY DESCRIPTION FACTORY
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
DISPLAY DESCRIPTION FACTORY
Setpoint 1
Setpoint 2
Setpoint 3
Setpoint 4
Setpoint 4
Setpoint 3
Setpoint 2
Setpoint 1
FACTORYDESCRIPTIONDISPLAY
Setpoint 4
Setpoint 3
Setpoint 2
Setpoint 1
FACTORYDESCRIPTIONDISPLAY
The meter performs a reset and inhibits the displays configured as , as
long as activated (maintained action).
DISPLAY DESCRIPTION FACTORY
Maximum
Minimum
When activated (momentary action), the meter resets the displays configured as
. (Momentary resets improve max. input frequencies over maintained resets.)
DISPLAY DESCRIPTION FACTORY
Maximum
Minimum
To Next Page
Loading...
Need help?
General
