red lion CUB5 Series - User Manual

1
z CONFORMS TO ITS-90 TEMPERATURE STANDARD
z COLD JUNCTION COMPENSATION (Enable/Disable)
z MINIMUM AND MAXIMUM DISPLAY CAPTURE
z LCD, REFLECTIVE OR GREEN/RED LED BACKLIGHTING
z 0.48" (12.2 mm) HIGH DIGITS
z OPTIONAL SETPOINT OUTPUT MODULES
z OPTIONAL SERIAL COMMUNICATION MODULES (RS232 or RS485)
z OPERATES FROM 9 TO 28 VDC POWER SOURCE
z FRONT PANEL OR CRIMSON PROGRAMMABLE
z DISPLAY COLOR CHANGE CAPABILITY AT SETPOINT OUTPUT
z NEMA 4X/IP65 SEALED FRONT BEZEL
MODEL CUB5TC - MINIATURE ELECTRONIC 5-DIGIT
THERMOCOUPLE METER
GENERAL DESCRIPTION
The CUB5 provides the user the ultimate in flexibility, from its complete user
programming to the optional setpoint control and communication capability.
The CUB5TC accepts a thermocouple input and provides a temperature display
in Celcius or Farenheit. The meter also features minimum and maximum
display capture, display offset, °F or °C indicator, and programmable user input.
The display can be toggled either manually or automatically between the
selected displays.
The CUB5 display has 0.48" (12.2 mm) high digits. The LCD is available in
two versions, reflective and red/green backlight. The backlight version is user
selectable for the desired color and also has variable display intensity.
The capability of the CUB5 can be easily expanded with the addition of
option modules. Setpoint capability is field installable with the addition of the
setpoint output modules. Serial communications capability for RS232 or RS485
is added with a serial option module.
The CUB5 can be powered from an optional Red Lion Micro-Line/Sensor
Power Supply (MLPS1000), which attaches directly to the back of a CUB5. The
MLPS1 is powered from 85 to 250 VAC and provides up to 400 mA to drive the
unit and sensors.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in this
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use this meter to directly command motors, valves, or other actuators
not equipped with safeguards. To do so can be potentially harmful to persons or
equipment in the event of a fault to the meter.
Bulletin No. CUB5TC-X
Drawing No. LP0643
Effective 06/06
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to
installationand operation of the unit.
CAUTION: Risk of electric shock.
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.
z THERMOCOUPLE INPUTS
Thermocouple types T, E, J, K, R, S, B, N, or mV
z PROGRAMMABLE TEMPERATURE OFFSET
z SELECTABLE °F or °C WITH 1 or 0.1 DEGREE RESOLUTION
z °F OR °C DISPLAY ANNUNCIATORS
Seltec Automation LLP, Unit G, Venture Business Park, Witty Street, Hull, East Yorkshire, HU3 4EL, UK
Web site- http://www.seltec.co.uk E-mail- sales@seltec.co.uk TEL: +44 1482 225297 FAX: +44 1482 212470

Summary

Programming the Meter

Programming Mode Entry

How to enter the meter's programming mode via the SEL button.

Module Entry

How to navigate between different programming modules using SEL and RST buttons.

Module Menu Navigation

Navigating within a specific programming module using the SEL button.

Selection and Value Entry

Process for selecting and entering parameter values using RST and SEL buttons.

Programming Mode Exit

How to exit programming mode and save changes using the SEL button.

Factory Settings

Procedure for restoring the meter to its factory default settings.

Module 1: Signal Input Parameters

Thermocouple Type Selection

Selecting the thermocouple type for accurate temperature measurement.

Cold Junction Compensation

Enabling or disabling internal cold junction compensation for accuracy.

Temperature Scale Selection

Display Decimal Point

Display Offset Value

User Input Function

Module 2: Secondary Function Parameters

Max Display Enable

Min Display Enable

Factory Service Operations

Options for performing factory service operations.

Restore Factory Default Settings

Restores all user settings to factory defaults using a code.

Calibration

Procedures for voltage and cold junction calibration.

Module 3: Display and Front Panel Button Parameters

Programming Security Code

Sets a security code to control access to programming parameters.

Module 4: Setpoint Output Parameters

Setpoint Select

Selects the setpoint (output) to be programmed.

Setpoint Value

Setpoint 2 Enable

Hysteresis Value

Output Reset Action

red lion CUB5 Series Specifications

General

Display Type	LCD
Operating Temperature	0 to 50°C
Mounting	Panel Mount
Input Types	Thermocouple, RTD, Frequency, Pulse
Storage Temperature	-40 to 60 °C
Bezel	IP65 rated
Communication Interface	RS-485