EasyManuals Logo

red lion PAXD Series User Manual

red lion PAXD Series
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
MODEL PAXH - AC TRUE RMS VOLT AND CURRENT
! FOUR VOLTAGE RANGES (300 VAC Max)
! FIVE CURRENT RANGES (5 A Max)
! ACCEPTS AC OR DC COUPLED INPUTS
! THREE WAY ISOLATION: POWER, INPUT AND OUTPUTS
MODEL PAXS - STRAIN GAGE INPUT
! LOAD CELL, PRESSURE AND TORQUE BRIDGE INPUTS
! DUAL RANGE INPUT: ±24 mV OR ±240 mV
! SELECTABLE 5 VDC OR 10 VDC BRIDGE EXCITATION
! PROGRAMMABLE AUTO-ZERO TRACKING
PAXS SPECIFICATIONS
SENSOR INPUTS:
PAXH SPECIFICATIONS
INPUT RANGES:
Isolation To Option Card Commons and User Input Commons: 125 Vrms
Isolation To AC Power Terminals: 250 Vrms
*Conditions for accuracy specification:
- 20 minutes warmup
- 18-28°C temperature range, 10-75% RH non-condensing
- 50 Hz - 400 Hz sine wave input
- 1% to 100% of range
- Add 0.1% reading + 20 counts error over 0-50°C range
- Add 0.2% reading + 10 counts error for crest factors up to 3, add 1% reading up to 5
- Add 0.5% reading + 10 counts of DC component
- Add 1% reading + 20 counts error over 20 Hz to 10 KHz range
** Non-repetitive surge rating: 15 A for 5 seconds
*** Inputs are direct coupled to the input divider and shunts. Input signals with
high DC component levels may reduce the usable range.
MAX CREST FACTOR (Vp/VRMS): 5 @ Full Scale Input
INPUT COUPLING: AC or AC and DC
INPUT CAPACITANCE: 10 pF
COMMON MODE VOLTAGE: 125 VAC working
COMMON MODE REJECTION: (DC to 60 Hz) 100 dB
INPUT
RANGE
ACCURACY*
MAX DC
BLOCKING
IMPEDANCE
(60 Hz)
MAX
CONTINUOUS
OVERLOAD
RESOLUTION
2 mA
0.1% of reading
+2 µA
±50 mA
111 ohm 50 mA
0.1 µA
20 mA
0.1% of reading
+20 µA
±150 mA
11.1 ohm 150 mA
1 µA
200 mA
0.1% of reading
+0.2 mA
±500 mA
1.1 ohm 500 mA
10 µA
5 A
0.5% of reading
+5 mA
±7 A***
0.02 ohm 7 A** 1 mA
200 mV
0.1% of reading
+0.4 mV
±10 V
686 Kohm 30 V 0.01 mV
2 V
0.1% of reading
+2 mV
±50 V
686 Kohm 30 V 0.1 mV
20 V
0.1% of reading
+20 mV
±300 V
686 Kohm 300 V 1 mV
300 V
0.2% of reading
+0.3 V
±300 V***
686 Kohm 300 V 0.1 V
200 µA
0.1% of reading
+0.4 µA
±15 mA
1.11 Kohm 15 mA
0.01 µA
CONNECTION TYPE: 4-wire bridge (differential)
2-wire (single-ended)
COMMON MODE RANGE (w.r.t. input common): 0 to +5 VDC
Rejection: 80 dB (DC to 120 Hz)
BRIDGE EXCITATION :
Jumper Selectable: 5 VDC @ 65 mA max., ±2%
10 VDC @ 125 mA max., ±2%
Temperature coefficient (ratio metric): 20 ppm/°C max.
INPUT RANGE
ACCURACY*
(18 to 28°C)
ACCURACY*
(0 to 50°C)
IMPEDANCE
MAX
CONTINUOUS
OVERLOAD
RESOLUTION
±24 mVDC
0.02% of
reading +3 µV
0.07% of
reading +4 µV
100 Mohm 30 V
1 µV
±240 mVDC
0.02% of
reading +30 µV
0.07% of
reading +40 µV
100 Mohm 30 V
10 µV
* After 20 minute warm-up. Accuracy is specified in two ways: Accuracy over an 18
to 28°C and 10 to 75% RH environment; and accuracy over a 0 to 50°C and 0 to
85% RH (non-condensing environment). Accuracy over the 0 to 50°C range
includes the temperature coefficient effect of the meter.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the red lion PAXD Series and is the answer not in the manual?

red lion PAXD Series Specifications

General IconGeneral
Brandred lion
ModelPAXD Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals