red lion RJC-100 User Manual

redlionproducts.com
ENGLISHEN
Table of Contents
Before Getting Started .................................................................2
Installation Checklist ....................................................................3
Application .................................................................................... 4
Voltage Wiring Instructions ......................................................... 4
Materials and Tools Needed .........................................................5
Important Information .................................................................5
Quick Installation Guide ...............................................................6
Detailed Installation Instructions .............................................7-9
Pump to Tank Installation ...........................................................10
Typical Installations ......................................................................11
Wiring Instructions ......................................................................12
Priming the Pump .......................................................................13
Maintenance ................................................................................. 14
Troubleshooting ...........................................................................15
Replacement Parts ......................................................................15
Limited Warranty .........................................................................16
THIS PUMP IS DUAL VOLTAGE AND FACTORY SET FOR 230 VOLTS.
SEE VOLTAGE WIRING INSTRUCTIONS TO SET FOR 115 VOLTS.
RJC-100
CONVERTIBLE JET PUMP
Owner’s Manual

red lion RJC-100 Specifications

General

Model	RJC-100
Horsepower	1 HP
Voltage	115/230V
Power Supply	Single-phase
Operating Temperature	32°F to 104°F (0°C to 40°C)

Summary

Before Getting Started

Risk of Electric Shock

Details hazards and precautions related to electrical shock.

Pressure Relief Valve Recommendation

Advises on installing a 75 PSI pressure relief valve for safety.

Installation Checklist

Application

Voltage Wiring Instructions

Guides on setting the pump's voltage to match the power source.

Materials and Tools Needed

Joining Pipe Fittings

Provides methods for securely connecting PVC and metal pipe fittings.

Suction & Pressure Pipe

Specifies requirements for suction and pressure pipes and their installation.

Quick Installation Guide

Detailed Installation Instructions

Deep Well Application

Specific instructions for installing the pump in deep wells (20-90 ft).

Shallow Well Application

Drilled Wells (with foot valve)

Details installation for drilled wells using a foot valve.

Driven Well (with check valve and well point)

Pump to Tank Installation

Typical Installations

Wiring Instructions

Priming the Pump

Single Pipe Installation (Shallow Well)

Priming steps for shallow well systems with an in-line check valve.

Double Pipe Installation (Deep Well)

Priming steps for deep well systems using a two-pipe setup.

Maintenance

Replacing Mechanical Seal

Detailed steps for disassembling and reassembling the mechanical seal.

Troubleshooting

Limited Warranty