red lion RJS-75SS User Manual

RJS-75SS/RL15HS Jet Pump/Tank System
English
EN
OWNER'S MANUAL
The shallow well jet pump is ideal for the supply of fresh water to rural
homes, farms, and cabins. This pump is suitable for installations
where the vertical distance from the pump to the water level does not
exceed 25 ft (7.6 m), including draw-down (less at high altitudes). The
intake is 1” FNPT while the discharge is 1” FNPT. The pressure gauge
port is 1/8” NPT. This tank maintains the water pressure in a residential
water pump system when the pump is not running.
This product is covered by a Limited Warranty for a period of 2 years
from the date of original purchase by the consumer. For complete
warranty information, refer to www.redlionproducts.com
, or call Tech-
nical Support for a printed copy.
Specifications
Model Item Number HP Volts Amps
RJS-75SS/RL15HS 602240 3/4 115/ 230 9.0 / 4.5
Table of Contents
INSTALLATION- - - - - - - - - - - - - - - - - - - - - - - - - -3
Typical Installations- - - - - - - - - - - - - - - - - - -3
System Location - - - - - - - - - - - - - - - - - - - - -4
Physical Installation- - - - - - - - - - - - - - - - - - -4
Electrical Connections - - - - - - - - - - - - - - - - -5
OPERATION- - - - - - - - - - - - - - - - - - - - - - - - - - - -6
Priming with an In-line Check Valve - - - - - - - -6
Priming with a Foot Valve- - - - - - - - - - - - - - -6
MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - -7
Periodic Maintenance- - - - - - - - - - - - - - - - - -7
Checking the Tank Pressure - - - - - - - - - - - - -7
Draining - - - - - - - - - - - - - - - - - - - - - - - - - -7
Storage- - - - - - - - - - - - - - - - - - - - - - - - - - -7
Replacing Mechanical Seals- - - - - - - - - - - - - -8
Troubleshooting - - - - - - - - - - - - - - - - - - - - -9
Replacement Parts - - - - - - - - - - - - - - - - - - -10

red lion RJS-75SS Specifications

General

Brand	red lion
Model	RJS-75SS
Category	Water Pump
Language	English

Summary

Specifications

Safety Instructions

Installation Guide

Typical Installations

Illustrates plumbing arrangements for foot valve and driven point systems.

System Location

Guidance on choosing a clean, dry, ventilated, and accessible installation site.

Physical Installation Steps

Steps and warnings for physically mounting and connecting the pump system.

Electrical Connections

Instructions for wiring the pump, including voltage selection and safety.

Operation Procedures

Priming with an In-line Check Valve

Procedure for priming the pump using an in-line check valve.

Priming with a Foot Valve

Procedure for priming the pump using a foot valve.

Maintenance and Troubleshooting

Periodic Maintenance

Regular checks for leaks, performance, and cleaning the pump exterior.

Checking the Tank Pressure

Guide on how to check and adjust the tank's pre-charge pressure.

Draining the System

Steps to drain the system for winterization or maintenance.

Pump Storage Guidelines

Instructions for storing the pump in a clean, dry, temperature-controlled environment.

Replacing Mechanical Seals

Detailed steps for disassembling and reassembling the pump to replace seals.

Troubleshooting Common Issues

Common problems, their probable causes, and corrective actions for the pump.

Replacement Parts List

List of available parts, their descriptions, and part numbers.