RED'S ENGINEERING SRPT-02 - User Manual

SRPT-02
Users Manual
Overview:
•
•
•
•
•
•
•
•
•
•
•
•
The SRPT-02 is an affordable repeater system
designed for GMRS and Ham Radio enthusiasts. It
offers fast plug-and-play repeater operation and
works with UV-5R compatible two-way radios.
This repeater comes equipped with a built-in
rechargeable battery that can be charged via a
USB C connection, making it an excellent choice
for trips where repeater coverage is unavailable.
The internal battery can provide a weekend's
worth of use on a single charge. This small and
compact device can be easily attached to any
base station or handheld radio for mobile use. It's
simple to use and works right out of the box.
Configuration can be performed using a web
application. The repeater can be powered either
by the internal battery or the USB port located
on the top of the unit. Real-time LED indicators
provide operational status updates. DTMF tone
detection allows you to enable or disable the
repeater directly from the field. Additionally, an
open frame design allows for compactness, and
plastic shields can be attached for added
ruggedness when needed. The SRPT-02 also
supports CCTSS on your radio for added privacy
and interference prevention. Currently, it
supports UV-5R and compatible radios.

Summary

Overview of SRPT-02

SRPT-02 Features

Connecting the SRPT-02

Operating the SRPT-02

Normal Operation

Describes the steps for normal operation, including radio volume adjustment for optimal performance and compatibility.

Enable;Disable Repeater

Explains how to enable or disable the repeater in the field using DTMF tones, detailing specific commands and acknowledgments.

SRPT-02 Configuration

Accessing Setup Mode

Provides step-by-step instructions to access the web interface for configuring the SRPT-02 repeater and enabling wireless configuration.

Station ID Configuration

Configure station identification, including enabling, call sign, and Morse code speed/delay settings.

Transmission and Filter Settings

Adjust carrier detect delay, minimum message length, and transmit delay for optimal repeater performance.

LED Indicator Control

Option to disable status LEDs for power conservation, affecting status reporting.

Advanced Operating Modes

Deep Sleep Mode

Enables reduced power consumption by putting the repeater into a deep sleep mode with a delay for wake-up.

Debug Mode

For debugging purposes only, enabled by instruction from engineers or developers.

Firmware Updates

Additional Features and Settings

Button Lockout Feature

Locks front buttons to prevent accidental activation during shipment or transport.

Restore Default Settings

Procedure to restore the repeater to its factory default configuration via the Setup button.

Troubleshooting SRPT-02

Repeater Not Powering On

Steps to resolve issues when the repeater fails to power on, checking battery and reset switch.

DTMF Tones Not Responding

Guidance on adjusting radio volume and DTMF key presses for correct repeater response.

Repeater Powers On, No Activity

Troubleshooting steps to ensure compatibility with UV-5R radios and avoid damage.

Technical Specifications

RED'S ENGINEERING SRPT-02 Specifications

General

Brand	RED'S ENGINEERING
Model	SRPT-02
Category	Repeater
Language	English