EasyManuals Logo

Redarc BCDC1220 Instruction Manual

Redarc BCDC1220
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
2 INSTALLATION
2.3 ORANGE wire - Battery Type Select
The ORANGE wire is used to select the Maximum output voltage. This is achieved
by connecting in the following way:
To select Profile A leave the ORANGE wire
disconnected. This will set the Maximum voltage to
14.6V
*1
.
To select Profile B connect the ORANGE wire to
Common Ground. This will set the Maximum voltage
to 15.0V
*1
.
To select Profile C connect the ORANGE wire to the
RED wire (Input source positive). This will set the
Maximum voltage to 15.4V
*1
.
Check the manufacturer’s data for your battery and
ensure that the Maximum voltage of the profile
you select does not exceed the manufacturer’s
recommended maximum charging voltage. If the
Maximum voltage for your battery type is too high,
please select another charging profile.
2.3.1 ORANGE wire - Setting Recommendations
Auxiliary Battery Location
Maximum Battery
Voltage Specification
Cabin
Install
Engine Bay
Install
14.6 A A
15.0 B A
15.4 C B
OR
Orange Wire
Red Wire
Input
Source
Positive
Midi
Fuse
Not
Connected
Orange Wire
Orange Wire
OR
25
50
+
*1
Voltages Specified are ±100mV

Other manuals for Redarc BCDC1220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Redarc BCDC1220 and is the answer not in the manual?

Redarc BCDC1220 Specifications

General IconGeneral
Input Voltage9 - 32VDC
Output Voltage12V DC
Output Current20A
Dimensions150mm x 120mm x 37mm
Weight0.65 kg
Battery Types SupportedAGM, Gel, Calcium
Charger TypeDC to DC
Protection FeaturesOver Temperature, Short Circuit, Reverse Polarity

Related product manuals