3 OPERATION
3.9 Troubleshooting
The Tow-Pro
™
Elite features sophisticated diagnostics to warn the operator of faults in
the vehicle and trailer brake wiring. Wiring faults are indicated by a series of colour coded
flash patterns on the Tow-Pro
™
Elite LED.
Most faults turn out to be something simple such as a poor connection from a dirty trailer
socket, however a fault indication should not be ignored! It is a warning; if left unattended
such wiring faults can become worse and may lead to deterioration or loss of trailer braking.
Please refer to the table on pages 17 & 18 for the list of flash patterns, showing the cause
& recommended course of action for each of the conditions which may be detected.
Even intermittent faults are detected and may be indicated until cleared.
Most fault codes can be cleared by unplugging the trailer for 1 minute then
reconnecting.
16
To Next Page
Loading...
Need help?
General
