Redarc EBRH-ACCV2 User Manual

2 INSTALLATION
2.1 Mounting the main unit
The Tow-Pro
™
Elite should be mounted inside the vehicle cabin using either M4 screws
or other secure fitting methods at the mounting points provided. It is essential to mount
the unit in a location which allows access to the intended remote head location.
The Tow-Pro
™
Elite can be mounted in any orientation as long as the installation is
secure and the main unit cannot move or change orientation once installed. A change of
orientation will affect the system calibration.
Ensure that the Tow-Pro
™
Elite is mounted securely in a fixed location. Failure to mount
securely will result in inaccurate braking force measurements and incorrect braking of
the trailer.
Ensure that the Tow-Pro
™
Elite is installed inside the vehicle cabin and away from any
environmental conditions that may cause damage, including engine heat, submersion in
water, salt spray and humidity. Exposure to these conditions may cause damage to the
unit’s circuitry and may cause erratic trailer braking.
5
Any Secure Orientation OK
Do Not Mount to Cables / Wiring Looms

Redarc EBRH-ACCV2 Specifications

General

Brand	Redarc
Model	EBRH-ACCV2
Category	Controller
Language	English