Remote switch
‘on
‘position
Remote Starts
: Ensure the remote switch situated on the control panel of
your REDBACK Generator is in the ’
on
’ position. On the remote control,
press the grey ’start’ button twice then immediately press
and hold until the
REDBACK Generator starts.
Stop Button
Start Button
13
CAUTION! Do not let the easy coil starter cable recoil freely. Recoil the cable
slowly. Ensure you hold your REDBACK Generator tightly when pulling the easy
coil starter cable to prevent your generator tilting over.
NOTE: The remote start overrides the key start function.
NOTE: The key does not have to be ‘on’ position for the remote start and to work.
All manuals and user guides at all-guides.com
To Next Page
Loading...