DIGITAL DISPLAY
Under normal operating conditions, the digital
display will show 240v.
If the REDBACK Generator overloads or short
circuits, the digital display will show ’over’. If an
overload occurs no power will be produced.
If your REDBACK Generator overloads, first
disconnect your equipment and
Check if the equipment is faulty. If nothing is faulty, check the operating
Wattage of your devices does not exceed the operating wattage of the
REDBACK Generator.
OIL ALARM SYSTEM
The REDBACK Generator oil alert is designed to
prevent damage due to the lack of oil.
If your REDBACK Generator oil level
gets low, it will automatically shut down to prevent
damage. If this occurs, ensure you turn the key to
the "
off
’ position.
If you try to start your
REDBACK
Generator with
low oil, the oil warning light (red)
will
flash. If
this occurs, add oil.
16
To Next Page
Loading...