5. SPECIAL TOOLS
Part name Part No. External appearance Usage
4
Air Gap Gauge 3350-96240 To set ignition coil.
To remove / install piston
pin.
3
Rod Assy 1101-96220
To hold crankshaft when
disassembling /
assembling clutch and
rotor.
2
Piston Stopper 4810-96220
1
Puller Assy 2890-96100 To remove rotor.
8
Drum Remover 5500-96120 To remove clutch drum.
9
Snap Ring Guide
5500-96130 To install clutch drum.
10
Snap Ring Push 5500-96140 To install clutch drum.
Guide
For socket screw of
Hex.3mm,4mm and 5mm.
5
Hex Wrench 3304-97611
To remove / install recoil
pulley
6
Puller 4500-96100
7
Snap Ring Pliers
5500-96110 To remove snap ring.
To Next Page