RedMax GZ25N - 6-19 Assembling Cluch Drum

17
STRATO CHARGED ENGINE  GZ25N
6. SERVICE GUIDE
Caution:
Make sure to replace the snap ring if it is deformed.
Assemblingshallbedonebyanreverseorderto
thedisassembling.
・ Assembletheclutchdrumintotheclutchhousing
andsetthesnapringusingasnapringguide
(5500-96130)andthesnapringpushguide(5500-
96140).
・Aftertheassembly,applymolybdenumgrease
ontheclutchdrumspline.
6-19 Assembling Cluch Drum
1) Assembling Snap Ring
Snap Ring
Push Guide
Clutch Drum
Snap Ring
Guide
Snap Ring
Tap the stopper by hand and engage the snap
ring into the drum groove.
MolybdenumGrease
2) Applying grease
Holdthedrumremover(5500-96120)ontheclutch
drum,andgentlyhammertopullouttheclutch
drum.
2) Removing Clutch Drum
Hammer
Drum Remover
Clutch Drum