Need help?Do you have a question about the Redon GTR and is the answer not in the manual?
Detailed steps and illustrations for safely removing the axis locking gear from the machine.
Details of various rear panel ports including air inlet, USB, and network connectors.
Description of the power button function and the 6-bar air inlet for compressor connection.
Overview of the REDON GTR's main user interface screen, showing status indicators and controls.
Explanation of the user interface's menu bar and function buttons bar for operation.
Steps for loading programs into the machine and initiating their execution in RUN mode.
Guide on how to install programs onto the machine, including using USB drives.
Detailed instructions for installing programs using FileZilla via an Ethernet connection.
Explanation of the JOG mode for manual movement of the machine's axes.
Overview of the ATC main menu for tool management and checking tool status.
Procedures for changing tools, managing tool life, and configuring twin tools.
Steps for assigning, managing, and deleting twin tools in the ATC system.
Daily, weekly, and yearly maintenance tasks for the machine's upkeep.
Detailed steps for calibrating the machine using a digital caliper and PMMA disc.
Reference list of available milling tools, their codes, and descriptions.
Description of the axis locking gear's function and the workpiece retainer assembly.
Instructions for connecting water/air hoses and attaching drainage/filter caps.
General| Brand | Redon |
|---|---|
| Model | GTR |
| Category | Controller |
| Language | English |
To Next Page