Placeallpartsoftheellipticalexerciserinaclearedareaandremovethepackingmaterials.Donotdisposeof
thepackingmaterialsuntilassemblyis completed.
Inadditiontothe included tools, assembly requires an adjustable wrench ©_ and a rubber
%/-
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LiST on page 25. The second number refers
to the quantity used in assembly. Note: Some small parts may have been pre°assembled for shipping. If a
part is not in the parts bag, check to see if it has been pre-assernbled.
M4 x 16mm
Screw (82)--6
w
M4 x 19mm
Screw (92)=2
M4 x 25mm
Screw (96)-2
M6 x 16mm Button
Screw (93)-2
M6 x 20mm Patch
Screw (75)-4
M6 Split MI0 Nylon
Washer (72)=2 Locknut (85)-4
\
M8 x 19mm Patch \
\\
Screw (81)-4 \-_
M8 x 25mm Patch
Screw (73)-12
Large M8
Washer (70)-2
Small M8
Washer (71)-2
J \\
\
\
\
\
\
\,,
Plastic Pedal Arm
Spacer (65)-4 /
Bolt Set (67)-2
1. Identify the Front Stabilizer (63), which has Wheels
(27) attached to one side. Attach the Front Stabilizer
to the front of the Frame (1) with four M8 x 25mm
Patch Screws (73).
5
To Next Page
Loading...
