Graph Cursor Overview
The graph has two vertical lines called CURSOR A and CURSOR B. The
time and measurement value is displayed on the top and right side of
each cursor. While the Normal Cursor is selected, click and drag CURSOR
A or B and to move it left or right. Right below the main graph is a slider.
You can also click and drag the slider to move the Cursors as well.
Below the slider are statistic, that display the start time, sampling rate,
data number, maximum, and minimum of the graph. The statistic also
displays the maximum, minimum, and average between CURSOR A and
B and will update automatically when they are moved.
Graph Zoom
You can choose a rectangle area on the graph to zoom in for detail.
1. Press the left mouse button and drag the cursor to select the new
extents.
2. Release the mouse button.
3. To undo the Zoom, right click on the graph and select Undo Zoom
in the pop-up menu.
Loading Records
1. Turn the meter on and connect it to a PC.
2. Open the Data Logging Software.
3. Select “DataLogger” from the Main Menu or click on the
button on the Tool Bar.
4. A progress bar will appear (if an error occurs, press the button
again).
5. The left side of the screen will show how many data sets were
loaded and detailed information on each.
6. The rst data set will appear on the graph and tabulate on the
right hand side when you click on another data set.
1.888.475.5235info@REED-Direct.com
REED-Direct.com
To Next Page
