Reely Core - B) Adjusting the Shock Absorbers

46
b) Adjusting the shock absorbers
Front axle Rear axle
Theshockabsorberscanbexedatdifferentpositions(A)and(B)onthefrontandrearaxle.Duetothedifferent
geometry between the chassis and the axles, there is a difference in spring behaviour. This has only a very limited
effect on the vehicle. We recommend that you do not change the existing assembly position of the shock absorbers.
Should you wish to change the adjustment, always ensure that the shock absorbers on each axle are level (i.e. on the
left and right wheel of the front or rear axle), otherwise the vehicle may not respond correctly.