Reer EOS4 Series - Warnings Regarding Connection Cables

EOS4 SAFETY LIGHT CURTAIN
18 8540733 • 23/03/2016 • Rev.17
English
EOS4XS - EOS4XS2 (SLAVE/SLAVE2 models) - M12, 5-pin primary connectors.
1
Brown
24VDC power supply
2
White
Communication
MASTER-SLAVE
3
Blue
0VDC power supply
4
Black
Communication
MASTER-SLAVE
5
Grey
Ground connection
Table 10 - M12, 5 pins Primary Slave RX
EOS4XM (MASTER models) - M12, 5-pin Secondary Connector.
EOS4XS2 (SLAVE2 models) - M12, 5-pin Secondary Connector.
1
Brown
24VDC power supply
2
White
Communication
MASTER-SLAVE
3
Blue
0VDC power supply
4
Black
Communication
MASTER-SLAVE
5
Grey
Ground connection
Table 11 - M12, 5 pin Secondary RX
Warnings regarding connection cables
 For connections with a length of more than 50m, use cables having a cross-section
of at least 1mm
2
.
 It is good practice to keep the power supply of the light curtain separate from that
of other electric power equipment (electric motors, inverters, frequency variators)
or other sources of disturbance.
 Connect the Emitter and Receiver to the ground outlet.
 The connection cables must follow a different route from that of other power
cables.