To Next PageTo Next Page
Need help?Do you have a question about the Reese 94920 and is the answer not in the manual?
Lists necessary sockets, wrenches, torque wrenches, and lubrication for installation.
Notes equipment needed for lifting approximately 250 lbs.
Details the 20K Goosebox unit and the components of the fastener kit.
Verifies vehicle and trailer tow ratings against Goosebox capacity.
Ensures minimum 2 ft clearance and approximately 7 inches trailer height.
Emphasizes understanding and not exceeding truck and trailer tow ratings.
Covers rearview mirrors, brake controller, and tire inflation.
Includes wide turns, safety chains, coupling surfaces, and level loading.
Advises on trailer loading, clearance, and avoiding rear-heavy loads.
Stresses GROSS TRAILER WEIGHT and PIN WEIGHT must not exceed system ratings.
Covers trailer coupling smoothness, cleaning, lubrication, and safety chain connection.
Highlights checking trailer lights, signals, breakaway switch, and tire inflation.
Includes avoiding tandem towing, no passengers in trailer, proper loading, and driving adjustments.
Step-by-step guide for safely hitching the Goosebox to the gooseneck ball.
Detailed steps for safely unhitching the Goosebox from the gooseneck ball.
Illustrates standard and lowest mounting positions for Lippert 1621 wing sets.
Shows standard and lowest mounting positions for Lippert 1716 wing sets.
Details the single mounting position for the Lippert Rhino wing set.
Shows the correct installation of bolts, washers, and nuts with torque specifications.
Ensures proper coupling, securement, and vehicle/trailer positioning before air adjustment.
Describes the two-person process for filling the Goosebox air system.
Details adding air to the fill valve and monitoring the air inflation indicator.
Explains nominal, maximum, and low air positions shown on the indicator.
Covers greasing fittings, cleaning the ball, and inspecting for damage.
Lists essential checks before each trip, including equipment, bolts, and airbag pressure.
Instructions for properly storing safety chains when not in use.
Suggests using a lock for theft prevention in the specified location.
Shows the recommended location for mounting the breakaway switch.
Details what the limited lifetime warranty covers and its limitations.
Outlines purchaser responsibilities for claims and available remedies.
Specifies the governing state law and jurisdiction for warranty disputes.
General| Brand | Reese |
|---|---|
| Model Number | 94920 |
| Type | Ball Mount |
| Material | Steel |
| Finish | Black Powder Coat |
| Weight Capacity | 6000 lbs |
