Reese M5 - User Manual

M5 HEAD & CENTER SECTION
Part Number:
30892 & 30884
FOR INSTALLATION WITH
M5 MOUNTING LEGS
Table of Contents
*Note: Leg Assembly instructions can be found under their individual part number
VEHICLE FORWARD
1
Legs (Sold Separately)
(GM shown)
2
3
4
5
4
3
Equipment Required:
M13 Socket
Torque Wrench
Lithium Grease
8
FIG. 1
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
6 7
WARNING: Failure to follow installation and hitch-up instructions may cause property loss, serious injury, or death!
CAUTION: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle
towing and load capacity.
Hitch Rated for 20,000 lbs.
Max. Pin Weight 5,000 lbs.
Installation p 2
- Assembly p 2
- Added clearance to Cab p 3
- Guidelines for matching hitch,
truck, and trailer p 4
Use Instructions p 7
p 7
p 8
p 8
p 9
p 10
- Handle Position Overview
- Hitching
- Pull Test
- Unhitching
- Maintenance
# Description Qty.
1 M5 Head Unit
(30892)
1
2 Handle 1
3 ½” Pull Pin 2
4 Spring Clip 2
5 M8 Carriage Bolt 2
6 M8 Lock Washer 2
7 M8 Nut 2
8 M5 Center
Section (30884)
1
NOTE: It is recommended that you start with the M5 Leg Instructions.
Installation Instructions

Summary

Assembly

Handle Assembly

Attaching the handle to the head unit using carriage bolts, lock washers, and nuts.

Center Section Attachment to Legs

Connecting the center section to the M5 Leg Structure and adjusting height for clearance.

Head Attachment to Center Section

Securing the head unit to the center section with pull pins and spring clips for proper function.

Added Clearance to Cab

Guidelines for Matching Hitch, Truck, and Trailer

Handle Position Overview

Ready-to-Receive Position

Head position when delivered, not in use, coupling, or uncoupling; indicator shows RED.

Latched Position

Head position when latched to trailer; indicator shows 100% GREEN for proper connection.

Unhitching Position

Head position when unhitching the trailer; indicator shows RED for disengagement.

Hitching Procedure

Unhitching Procedure

Make Sure Trailer is Secure

Ensuring trailer stability with blocks/chocks and lowered landing gear before unhitching.

Make Sure Truck is Ready to Unhitch

Disconnecting electrical/breakaway cables and lowering tailgate before unhitching.

Maintenance

Every Use

Apply grease to skid plate, jaw, and kingpin for lubricated surface after each use.

Annually;As Required

Lubricate internal mechanisms and pivot assemblies annually or as needed.

Reese M5 Specifications

General

Brand	Reese
Model	M5
Category	Automobile Accessories
Language	English