1) Scan Mode – Fast or Quality - Fast mode offers a fixed
exposure time, and quality mode adjusts the exposure
time according to the film,
2) Resolution – 6M/24M - 6Megapixels and 24
Megapixels
3) File Type - TIF or JPG, TIF is an uncompressed file
format better for post scan editing, JPG Low, Medium
or High , the high setting produces an image with the
least amount of compression, Low produces smaller
files.
4) Color Depth – 8 or 16 bit – 8 bit color is equal to
8bits per color channel 8x3=24 bit color, 16 bits per
color channel 16x3=48 bits color
5) Magic Touch – Removes dust and scratches when
enabled, using Infrared technology
6) Multipass Xposure – This takes three individual
exposures, and then combines them for the final
image, to produce the best quality output.
7) Orientation – Select which direction your films will be
facing before scanning so the software can re-orient
them during the scan process
8) Scan – Select your film type
9) Clean Rollers – This accesses directions for cleaning
the rollers (this should be done every 100 scans)
10) Eject Film – Ejects inserted films (all)
11) Update Firmware – After downloading firmware
updates online click here to apply it
12) About – Provides scanner hardware and software
information
13) Exit – Exits the program prompting you to save your
settings, file directory, custom names etc.
Main User Interface
Main User Interface
12
To Next Page
Loading...
