HOW TO SCAN SLIDES
STEP 1 – Acquire Driver
(For PC User)
Open CyberView from Start – All Programs –CyberView
(For MAC User)
Open Macintosh Hard drive – Applications –CyberView
STEP 2 – Select Film Type
Select the film type to be scanned - Positive, Negative or B&W (Black and White).
STEP 3 – Optional Prescan
Select the “Prescan Current Frame“ to prescan the slide currently loaded into
the scanner or “Prescan...“ to prescan slide or slides at specific positions in the
magazine.
Pre-Scanning should be used to manually adjust color/edit settings for each slide
before doing the final scan. It’s possible to set different settings for each slide to
be scanned.
12
To Next Page
Loading...
